To send me a mail, please click HERE ! As payment, we accept wired bank transfer, and PayPal
No credit cards, sorry, but you may use them with
PayPal accepted, but all payments MUST to be received NET from the 4% fee, sorry
ATTENTION: ready cases (many are ready !) are usually sent within 2/3 days.
BUT, not ready cases and other items may need a CALM 15+ days making time !
------------------------------------------------------------------------------------------------------------------------------------------------
ATTENTION: I reserve the right to improve my cases, as actually I am doing very often !
Then, some of the recently made cases may slightly differ (in better) from the pictured ones !
CUSTOM MADE CASES
MY ONLY shipping address, for items or payments:
Luigi Crescenzi, via Courmayeur 35, 00135 Roma, Italy
in order to convert EURO in your courrency, please click: http://www.xe.com/ucc/
ONLY for emergencies, please, call me at ++39 337 747633
In fact, I definitely PREFER to communicate by email, it's a lot better for both !
Dear visitors of this page(s), let me finally introduce "officially" my very special SS Tripod "flush" SCREW, the one that some (few) buyers of my cases already knows... Sincerily, I am quite proud of this my idea ! Unlike Leica cases screws, and, as far as I know, unlike ALL cases screws, this special "Luigi's" screw still leaves the case bottom perfectly flat, without the uncomfortable protrusion on the bottom, that prevents the case (and the camera) to rest firmly even on the most flat surfaces ! His design permit to easily operate it with any thin coins, and in the lower part there is the useful TRIPOD hole, with the smaller thread, the one actually used by ALL makers.
It is quite costly, Eur 60 each (fitted), because: 1. every screw is hand made with a lathe - 2. the screw is all made in solid stainless steel, of which I am a fanatic user, being me a "boat's man"... - 3. to fit well it is a not easy job, it takes a lot of time and care, and there is always the risk to ruine a NEW case !
ATTENTION: the "Bottom SCREW" is not fitted in our cases by default !
It will be fitted ONLY upon a clear request, and a related payment for it.
(click) - For our colours samples...
Luigi's outfit cases, that can be as our proposal, or even "custom" made,
following (if possible) your wish on design, measures, inner sizes, colour finish !
This new "open mind" option is possible only thanks to a very flexible, fine artisan !
The picture above and the many pictures below
are showing the final design of our outfit case model.
NOW I'VE POSTED THE FINAL VERSION, WICH COST IS...
Average price with my measures, or yours if similar, Eur 450 with strap
It is extremely robust, LIFE LASTING, cameras and lenses are seriously protected !
ATTENTION: for my "how to purchase" INFO page, please click HERE !
Luigi's outfit case, our proposal external sizes are
% cm 24 x 15 x (h) 17.5, weight is % from 1150 to 1250 grams
the INNER compartments measures of this model are:
% cm 12 x 9,5 the larger, % cm 8 x 9,5 the smaller one
BUT, please note that I accept to make this "outfit case" model
accordingly with YOUR preferrerd measures, and often at the same
stated price, or, if really larger, at a reasonably (small) extra cost...
Eur 450 with strap
Luigi's outfit cases, that can be as our proposal, or even "custom" made,
following (if possible) your wish on design, measures, inner sizes, colour finish !
This new -open mind- option is possible only thanks to a very flexible, fine artisan !
ATTENTION: despite those pictures, we don't line any more the outfit case straps !
If lined, the strap may become too hard (less soft). But, upon request, we'll do it.
___________________________________________________________________________________________________
NEW Luigi's case custom made, with your measures !
Finally, you may have a nice case for any your
cameras, any brand, either compact, digital, folding !
Latest orders are for Leica D-Lux 2, and Panasonic DMC-LX1...
Custom made case for your Leica D-Lux 2, or Panasonic Lumix LX1
ATTENTION: for my "how to purchase" INFO page, please click HERE !
A nice, not too expensive case for your Leica D-Lux 2, or for Panasonic Lumix LX1
It can be fitted to a pant's belt, or (not included) with a proper, same leather strap,
available in three models. Also a special wrist strap can be useful for the camera...
(click) - For our colours samples...
The average cost of this case, sized until fitting a Leica M + Summicron 35/2 lens,
is Eur 120, + Eur 80 for the optional, special Deluxe strap made in two parts, allowing
the howner to separate the longer strap part, making it as an "hand", short one.
New pictures of this case, in a wider size for a Leica with Leicavit fitted.
It cost Eur 120, + Eur 80 for the very special (actually 2) strap(s).
__________________________________________________________________________________
Look at this "belt" case, made with our SAME marvelous 1st quality calf leather...
ATTENTION: for my "how to purchase" INFO page, please click HERE !
NEW line of my cases, with a lower price, and an easily
SIZE change, upon YOUR request ! ASK !
You can simply give us the INNER SIZE that you need, the preferred finish, and I will figure
immediately for you the (lower) cost, and shipping amount to your address... :-) ASK !
We designed this new case model in order to may offer it as a "custom" one, made
quickly, and at a very reasonable price. It has the "belt" loop, but you can
also have it with a neck strap. All "our" FIVE colours are available...
Euro 80 (small) to Euro 120 (for M), strap is an optional (Euro 50 to 60)
NEW pictures of a larger case, made for a Leica M
with a collapsible, or a SHORT lens. Euro 120
Those cases are perfect for any your small, fine digital camera !
Just email me with your requested INNER measures of the possible
case, and I'll email you the figured price... Euro 80 to Euro 120 (+ strap cost)
ATTENTION: for my "how to purchase" INFO page, please click HERE !
TWELVE COLOURS AVAILABLE, ALL WITH THE FINEST EXISTING ITALIAN CALF LEATHER
(click) - For our colours samples...
_______________________________________________________________________
A small item that represents one of the "secrets" of many professional photographers...
A new very special product MADE and offered by Leicatime !
Please, look attentively... I am introducing the NEW two "soft shutter releases"
buttons for Leica and other cameras, 16 mm diameter for your finger's comfort.
For Bessas I am making them smaller ! I know, several are offered around.
But, those two models are made in SOLID STAINLESS STEEL !
TWO models: "Concave" and "Convex" - Euro 12 each, choose yours !
NOW, you'll find the Leicatime website address engraved on their bottom.
Why I show them in this (cases) page ? Because I suggest
you to order it/them along with a case, avoiding to pay the shipping cost
for the soft release, alone ! I already placed one of them in EACH of my cameras... :-)
The softrelease screws into the remote shutter release mechanism inside the shutter button and provides a few advantages.
First, it physically raises the height of the shutter button, allowing you to use the joint or pad of your finger to fire the shutter rather than the tip. This results in a smoother action, more like squeezing a trigger than prodding a button, which reduces camera shake a little and is (to many people at least) more comfortable. Generally, the cable release socket also has a smoother action than the shutter button, so the softrelease turns it into something of a hair-trigger, which again helps reduce camera shake. The effect seems to vary a little camera-to-camera, but I find them essential items on my M6 and Canon P.
Most users experience a combined benefit of about a stop more usability in hand-held shooting: so if you find that you can normally manage sharp hand-held shots at only 1/30 a softie should allow you to go down to 1/15 and achieve the same results. Personally I find that, with the softie in place, I can manage decent shots of 1/4 second quite easily, and even 1/2 if I'm lucky (I must have steady hands).
The only downside is, as S. says, you do tend to end up with a few shots of the inside of your camera bag, unless you get into the habit of stashing the camera without winding on first. That said, film's cheap. (feedback from a friendly user...)
Now, also...
in Black Paint !However, I can't guarantee the paint duration... (NOW quite strong !)
I thought to post a feedback of a kind buyer, about this item(s) ! :-)
(
)
