Want to place an order ? For my "how to purchase" INFO page,
please click HERE !
To send me a mail, please click
HERE ! As payment, we accept wired bank transfer, and PayPal
No credit cards, sorry, but you may
use them with 
PayPal accepted, but all payments MUST to be
received NET from the 4% fee, sorry
ATTENTION:
ready cases (many are ready !) are usually sent within 2/3 days.
BUT, not ready cases and other items may need a CALM
15+ days making time !
------------------------------------------------------------------------------------------------------------------------------------------------
ATTENTION: I reserve the right to
improve my cases, as actually I am doing very often
!
Then, some of the recently made cases may slightly differ
(in better) from the pictured ones !
(click)
-
For our colours samples...
Cases for other
Digital cameras
"coming soon", for the
Olympus E-P1 !!!
------------------------------------------------------
Dear visitors of this page(s), let
me finally introduce "officially" my very special
Tripod "flush" SCREW, the one that some
(few) buyers of my cases already knows... Sincerily, I am quite proud of
this my idea ! Unlike Leica cases screws, and, as far as I know, unlike ALL
cases screws, this special "Luigi's" screw still leaves the case bottom
perfectly flat, without the uncomfortable protrusion on the bottom, that
prevents the case (and the camera) to rest firmly even on the most flat
surfaces ! His design permit to easily operate it with any thin coins, and
in the lower part there is the useful TRIPOD hole, with the smaller thread,
the one actually used by ALL makers.
A picture showing
my "Aged Brown" added patina...
Euro 10 extra, sorry.
It is quite costly, Euro
60 each (fitted),
because: 1. every screw is hand made with a
lathe - 2. the screw is all made in solid
stainless steel, of which I am a fanatic user, being me a "boat's man"... -
3. to fit well it is a not easy job, it takes a
lot of time and care, and there is always the risk to ruine a NEW case !
ATTENTION: the "Bottom SCREW" is not fitted in our cases by
default !
It will be fitted ONLY upon a clear request, and a related payment for it.
ATTENTION: for my "how to
purchase" INFO page, please
click HERE !
Finally, for your Lumix GF1, a my
Half Case with the "built-in-grip", and 12mm strap !
I am accepting orders, FINALLY I
HAVE SEVERAL CASES IN STOCK !
YOU already own the new
Lumix
GF1 ?
Then, despite the poor pictures of this MY
prototype case, you
may now already order it ! Several are ready to ship, finally.
My "built-in-grip" is more noticeable that the flat camera grip !
I am making them, with the 12mm Deluxe strap included, in the finishes:
Euro 180
in Black, Cognac Brown, Rally (other colors upon request)
Euro 200 in the very NEW "Natural Aged Brown" and
"Natural Aged Rally" finishes
Suggested fast Fedex Priority shipping, Euro 25
to EU or USA. Euro 30 elsewhere
I am making them, with the 12mm Deluxe strap included, in the finishes:
Euro 180 in Black, Cognac Brown, Rally (other
colors upon request)
Euro 200 in the very NEW "Natural Aged Brown" and "Natural
Aged Rally"
I am making them, with the 12mm Deluxe strap included, in the finishes:
Euro 180
in Black, Cognac Brown, Rally (other colors upon request)
Euro 200 in the very NEW "Natural Aged Brown" and
"Natural Aged Rally" finishes
Suggested fast Fedex Priority shipping, Euro 25
to EU or USA. Euro 30 elsewhere
Here the "Natural Aged Brown" case, it cost Euro 20 extra...
Here the "Natural Aged Brown" case, it cost Euro 20 extra...
all commands on the rear are easily reached
I am making them, with the 12mm Deluxe strap included, in the finishes:
Euro 180
in Black, Cognac Brown, Rally (other colors upon request)
Euro 200 in the very NEW "Natural Aged Brown" and
"Natural Aged Rally" finishes
Suggested fast Fedex Priority shipping, Euro 25
to EU or USA. Euro 30 elsewhere
-------------------------------------------------------------------------------------------------------------------------------
For Canon G10, just made !
Half case for
G10, with the 12mm Deluxe strap, Euro 160
Full case for G10, with 12mm Deluxe strap,
Euro 210
I received this question: " How
is this case attached to the G10 ? the strap doesn't
appear (in the photos) to thread through the camera body strap lugs. Thank
you"
Dear sir, thank you for
asking.
The camera would not fall down to the ground.
However, there are three possible "super/safety" solutions:
1) My special "flush" SS Tripod screw, at Euro 60
2) A tiny, free of charge leather lace (string) that may be
passed
into the camera lug, then fitted to a case strap side
3) A special, made upon request, extra stitched string, with a snap, too,
which
must to pass ABOVE the camera lens, then closed by the snap (Euro 10
more...)
Kind regards,
Luigi
Half case for
G10, with the 12mm Deluxe strap, Euro 160
Full case for G10, with 12mm Deluxe strap,
Euro 210
Half case for
G10, with the 12mm Deluxe strap, Euro 160
Full case for G10, with 12mm Deluxe strap,
Euro 210
Half (and full) case for Sigma DP1, just made
! Summer 2008
this is a "draft" page... I will improve it, soon ! (however, prices are below,
please, scroll...)
ATTENTION:
for my "how to purchase" INFO page, please
click
HERE !
Eur 140 for the HALF case, included the 12mm strap
(no neck pad)
FULL case
at
Euro 220
Red stitching, Euro 10 more
Euro 32 for the optional, spare Battery/SD cards
carrier
Euro 50 for the special SS “flush” Tripod screw
As for the shipping,
Euro 13 for the SLOW Registered Air Mail, 10-20+
days, or…
Euro 23 for the FAST Fedex, to EU and USA
ATTENTION: for my
"how to purchase" INFO page, please
click
HERE !
HERE OUR HALF CASE FOR YOUR
DIGITAL CANON G7 !
I will better explain how, but believe me: this model of horizontal case,
properly used EXTENDING the strap in the front direction, gives a "tripod"
effect !
ATTENTION: for my
"how to purchase" INFO page, please
click
HERE !
(click)
-
For our colours samples...
Finally, VERY requested, here the (prototypes
of) cases, our cases for Canon G7 !
The final version will be made, unlike the ones pictured there, with a special
rear cut, allowing to may use the optical viewfinder of the G7 also leaving
still closed the rear protective pad. Several available finishes, with strap,
Eur 140
Since October 2006, here our solution for an
HALF case for Panasonic Lumix
TZ1
In the pictures below you will see THREE colour finishes: aged brown, tan brown,
black
The rear "patch" may be fully removable, as in the pictures, OR stitched
to the case bottom
rear side, then hanging down when opened for the use, and LCD sceen and buttons
access
ATTENTION: for my
"how to purchase" INFO page, please
click
HERE !
TWELVE colour finish available. Price, with
the 12mm adjustable deluxe strap,
Eur 160
And, since now, November 2006, here our
proposal for the FULL case for
Lumix TZ1,
Eur 260
but with the normal 12 mm deluxe strap (braided, €
20 more...), nor the spare Battery/Cards
carrier (Euro 30 more...), that are available (to be
made) upon a crear, specifical request !
ATTENTION: for my
"how to purchase" INFO page, please
click
HERE !
And, since now, November 2006, here our proposal for the
FULL case for Lumix TZ1,
Eur 260
but with the normal 12 mm deluxe strap (braided,
Euro 20 more...), nor the spare Battery/Cards
carrier (Euro 30 more...), that are available (to be
made) upon a crear, specifical request !
A small item that represents
one of the "secrets" of many professional photographers...
A
new very special product MADE and offered by Leicatime
!
Please, look attentively... I am introducing
the NEW two "soft shutter releases"
buttons for Leica and other cameras, 16 mm diameter for your finger's comfort.
For Bessas I am making them smaller ! I know, several are offered around.
But, those two models are made in SOLID STAINLESS STEEL
!
TWO models: "Concave" and "Convex"
- Euro 20 each, choose yours !
NOW, you'll find the Leicatime website address
engraved on their bottom.
I suggest you to purchase it/them along with a case, avoiding to pay the
shipping
cost for the soft release, alone ! I already placed one in EACH of my own
cameras... :-)
ATTENTION: for my
"how to purchase" INFO page, please
click
HERE !
Now,
also...
in Black Paint !
However, I can't guarantee the paint duration... (NOW quite strong !)
I thought to post a feedback of a kind buyer, about this item(s)
! :-)
 |
|
Wonderful service. Soft release is well
made. You won't believe the difference!
|
|
Buyer
malewitsch
(
40 ) |
Finally, I am offering the SS MiniConvex for your RF Bessa cameras
! A few (nice) prototipes are available, ready,
Euro 20 each
No credit cards, sorry, but you may
use them with
NEW !
PayPal accepted, but all payments MUST to be
received NET from the 4% fee, sorry
